---
# Basic Config
esphome:
  name: ff-bath-fan
  platform: ESP8266
  board: esp8285

web_server:
  port: 80
  
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  domain: .int.mmax.cloud

button:
  - platform: restart
    name: "FF-Bath-Fan Restart"

logger:
api:
  encryption:
    key: "ejeMnlF5M60w/yuYwAWn/kIBz701xLwVkUGf9iN8uLA="
ota:
  password: "73cea25506d095b4970dedc41e2399fb"

# Device Specific Config
binary_sensor:
  - platform: gpio
    id: push_button
    pin:
      number: GPIO0
      mode:
        input: true
        pullup: true
      inverted: true
    internal: true
    on_press:
      # Prevents unintended LED lit states.
      if:
        condition:
          - switch.is_off: relay
        then:
          - switch.turn_on: blue_led
          - switch.turn_on: relay
        else:
          - switch.turn_off: relay

switch:
  # The relay switches on the red side of the LED when active.
  - platform: gpio
    name: "FF_Bath_Fan"
    pin: GPIO12
    id: relay
    on_turn_off:
      if:
        condition:
          - switch.is_on: blue_led
        then:
          - switch.turn_off: blue_led
  # With this we can control the blue side of the LED.
  - platform: gpio
    id: blue_led
    pin:
      number: GPIO13
      inverted: True

sensor:
  - platform: dht
    pin: GPIO14
    model: AM2302
    temperature:
      name: "FF Bath Temperature"
    humidity:
      name: "FF Bath Humidity"
      on_value_range:
        - above: 85.0
          then:
            - switch.turn_on: relay
        - below: 80.0
          then:
            - switch.turn_off: relay
    update_interval: 30s
  - platform: uptime
    name: Uptime Sensor
    id: uptime_sensor
    update_interval: 60s